Cancel

What types of functions and application scenarios are there for Tap-to-Run and Automation of smart devices?

Last Updated on：2026-01-30 09:47:02

Tap-to-Run

There are 3 main types of Tap-to-Run in the App. You can quickly start the smart devices in your home by setting up Tap-to-Run, saving the trouble of turning them on one by one.

Control Devices: Add the smart devices you want to control via Tap-to-Run

Example: You can turn on all the required smart devices in your home at the same time through Tap-to-Run, without having to turn them on individually.

Select Smart: Add the Automation you want to activate via Tap-to-Run (Pre-configured Automation is required)

Example: You can activate the pre-configured Automation through Tap-to-Run, without triggering the trigger condition of the Automation.

Delay: Add a delayed task

Example: You can set a desired delay for the linkage between two devices by adding a delay in Tap-to-Run.

Automation

There are 4 main types of Automation in the App. You can fully utilize the smart devices in your home by setting up Automation to enable a smart life.

When weather changes: Linkage between the external environment and devices

Example: You can set the air conditioner to turn on automatically when the temperature is higher than 29℃; or set the air purifier to turn on automatically when the PM2.5 value exceeds a certain number.

When location changes: Linkage between geographic location and devices. You can choose to perform specific actions when arriving at or leaving a certain place

Example: You can set the air conditioner and water heater at home to turn on automatically when you are near home; or set all electrical appliances at home to turn off and the motion detection function of the camera to turn on when you leave home.

Schedule: Linkage between the timing function and devices

Example: Set the curtains to open automatically at 8 a.m. on workdays.

When device status changes: Linkage between device status changes and other devices

Example: You can set the aromatherapy machine and air purifier at home to turn on automatically when the air conditioner is turned on; or set the alarm at home to trigger when the door magnetic sensor is activated.