English
English
简体中文
Register
Log In
English
English
简体中文
Register
Log In
Language
English
English
简体中文
Register
Log In

How to reset the Zigbee device to the state to be configured?

Last Updated on2024-08-05 06:44:33
Dear user, we are sorry for your inconvenience. You can follow the steps below (this is a general method, please refer to the product manual for specific methods):
  1. Devices with a reset button: Firstly, make sure the device is powered off for more than 10 seconds before powering on the device. Then long press the reset button on the device for about 5 seconds (for switch devices, the reset button is mostly the switch Button itself, you can try long press). Wait a few moments until the indicator light starts blinking rAPIDly. The device enters the pairing mode. You can add it now.
  2. Lighting equipment: Firstly, make sure the device is powered off for more than 10 seconds before powering on the device. Then turn on and off three times (on-off-on-off-on) power of the device (2 to 4 seconds between each on and off). Wait a few moments until the lighting starts blinking rAPIDly. The device enters the pairing mode.You can add it now.
Note: Zigbee devices do not support individual sharing, only sharing by adding family members.

Click for services and help

Help Center