I want to know if all the accessories of the home can be transferred to the new network without having to configure one by one.?
Last Updated on：2020-09-28 09:59:59
I want to know if all the accessories of the home can be transferred to the new network without having to configure one by one.?
Dear user, we are sorry for your inconvenience. If you have a lot of devices, you can add all the devices in your account at one time through the “Auto Scan” method, The following is the specific operation :
- On the homepage, click "+" in the upper right corner, and then you will enter the "Auto Scan" page. If you need to add Wi-Fi and Bluetooth devices at the same time, it is recommended that you enable Wi-Fi and Bluetooth, and then click "Start Search".
- Click "Configure Wi-Fi", and then click "OK", the system will automatically search for devices in the network configuration state (flashing state). Click "Next."
- At this time, you can click "Add" and then click "Finish" .You will see these devices on the homepage.
You can use the "Auto Scan" mode to configure multiple types of devices simultaneously:
- For Wi-Fi devices, you can configure network connections for multiple devices simultaneously in EZ mode and for only one at a time in AP mode. And AP mode dose not support “Auto Scan”mode.
- For ZigBee devices, you can configure network connections for three or four devices simultaneously after configuring the ZigBee gateway. If you configure more than four devices simultaneously, the network will become slow and network configuration may fail.
- For Bluetooth devices, Bluetooth mesh devices now support to be added multiple devices at the same time, and other Bluetooth devices (single-point Bluetooth devices and Wi-Fi&Bluetooth dual-mode devices) need to be added one by one.
Thank you for your support and understanding.
How helpful was this page?ExcellentSuggestions