How to reset the Bluetooth device to the state to be configured?
Last Updated on:2024-08-05 06:44:33
Dear user, we are sorry for your inconvenience. You can follow the steps below (this is a general method, please refer to the product manual for specific methods):
Devices with a reset button: Firstly, make sure the device is powered off for more than 10 seconds before powering on the device. Then long press the reset button on the device for about 5 seconds (for switch devices, the reset button is mostly the switch Button itself). Wait a few moments until the indicator light starts blinking rAPIDly. The device enters the pairing mode. You can add it now.
Lighting equipment: Firstly, make sure the device is powered off for more than 10 seconds before powering on the device. Then turn on and off three times (on-off-on-off-on) power of the device (2 to 4 seconds between each on and off). Wait a few moments until the lighting starts blinking rAPIDly (Bluetooth lamp will not blink all the time, it will be on after a few times). The device enters the pairing mode.You can add it now.
Note: Bluetooth devices do not support individual sharing, only sharing by adding family members. After sharing with family members, only one person can control the Bluetooth device at the same time. Other people's Apps will show that the Bluetooth device is offline. Only when the user exits the App, another person can control the Bluetooth device.