Cancel

How can Wi-Fi lighting devices enter the pairing mode?

Last Updated on：2024-08-05 06:44:33

The methods for Wi-Fi bulb devices to enter pairing mode typically include:

Cycling Operation: Some bulb devices may require a specific sequence of switch operations to reset. This is usually achieved by executing a series of power on and off cycles within a given time frame (e.g., switching three times).
Power Cycle: Turn off the power switch of the bulb, wait for a few seconds, and then turn the power switch back on. Some devices may enter pairing mode when powered back on.
Contact Manufacturer Support: If the above methods do not reset the device to pairing mode, it is recommended to contact the device manufacturer's customer support for further assistance and guidance. They may provide detailed reset steps specific to the device.

For desk lamp devices to enter pairing mode, the following methods are commonly used:

Power Cycle: First, try unplugging the power plug of the desk lamp device, wait for a few seconds, and then plug it back in to see if the device enters pairing mode.
Press Button: There may be a reset button on the desk lamp device; you can try pressing and holding it for a few seconds to see if it triggers the reset operation and enters pairing mode.
Cycling Operation: Typically achieved by executing a series of power on and off cycles within a given time frame.
Follow Manufacturer Instructions: It is recommended to consult the manufacturer's provided instructions to understand the specific reset steps for the device. Specific button combinations or sequences may be provided.