Cancel

What should I do if Zigbee beacon production test (0X29) fails?

Last Updated on：2024-02-18 06:46:11

1. Some firmware keys are not supported, (if you still can't receive after re-burning the authorization, then the firmware does not support it);

2. The ZIgbee beacon is not set to BC mode, the method to set the beaconhttps://developer.tuya.com/cn/docs/iot/Zigbeedongle-1?id=Kc3tprvdh1zq5;

3. The module needs to be in an unpaired state, and if the cumulative online time exceeds 15 minutes, the production test is closed.

Since the beacon production test command has limited firmware support, it is recommended to use the Zigbee module functionality test (0x08) command, and set the beacon to RF mode.