Register

Log In

Register

Log In

Cancel

Can WBR3 be reflow soldered?

Last Updated on：2023-01-30 09:46:12

Reflow soldering is supported. There is a recommended furnace temperature curve in the module data manual. You can refer to: https://developer.tuya.com/en/docs/iot/wbr3-module-datasheet?id=K9dujs2k5nriy

Related Topics

How to perform fixed frequency radiation for the WBR3 module (Common questions: How to operate WBR3 A15 at the bottom? Is there an alternative position for WBR3 A15? The module lifted after soldering the DuPont wire to A15?)

When conducting radiation scattering tests on CBU modules, how can the CSN point be soldered out if the CBU module is directly soldered to the substrate?

Click for services and help

Help Center

Consult

(001)844-672-5646

Submit Question