Which GPIO does the MCU use to wake up a Zigbee module?
Last Updated on：2026-03-04 07:34:31
The table below lists the serial port pins and wake-up pins for some Zigbee modules. These may vary depending on the firmware; please refer to the actual firmware for the correct information.
| Module Model | Module TX | Module RX | Wake-up MCU | Wake-up Module |
|---|---|---|---|---|
| ZS3L | PA5 | PA6 | PC1 | PA3 |
| ZS13S | PA5 | PA6 | PC1 | PA3 |
| ZSU | PA5 | PA6 | PC1 | PA3 |
| ZSC | PA5 | PA6 | PA0 | PA3 |
| TYZS3 | PA0 | PA1 | PF5 | PA2 |
| TYZS5 | PA0 | PA1 | PA4 | PA3 |
| ZTU | PB1 | PB7 | PB4 | PB5/PD2 |
| ZT3L | PB1 | PB7 | PB4 | PB5/PD2 |
| ZT5 | PB1 | PB7 | PB4 | PB5/PD2 |
| ZT2S | PB1 | PB7 | PB4 | PB5/PD2 |
Is this page helpful?
YesFeedbackMarketing Cooperation
Business Cooperation
Customer Service
Media Inquiry
Click for services and help
Help Center
Consult
(001)844-672-5646
Submit Question