Cancel

How to operate the socket or switch to enter a low power status?

Last Updated on：2024-09-11 07:32:45

1.The default status is low power status when the module is powered on for the first time. 2. Without anti-mistouch mode,long press the RESET button for 5s to reset the device, wait for more than 10s to power off, and then power on again. It will enter the low power status by default. 3. Use the app to configure the network with the device, click the 'Remove Device' button in the app to remove the device. After removal, wait for more than 10s to power off and then power on. It will enter a low power status by default.