Cancel

When will a Zigbee module report its network connection status?

Last Updated on：2023-01-30 09:46:52

Network connection states include:

1. not connected (0x00)

The device is powered on for the first time.
Network pairing fails.
The device disconnects from the network.
The device is restored to factory settings or the module is set to the pending network pairing state
Remove the device from the App

2. connected (0x01): A Zigbee module reports 0x01 when the device is connected to a network

3. abnormal network connection (0x02): when the module does not obtain the PID but receives a network pairing command.

4. The status of the network to be configured(0x03)