Cancel

How to prevent the module from entering the pairing state?

Last Updated on：2023-11-16 07:57:56

The universal WiFi docking protocol does not have instructions to turn off the module network, but during the opening process, the device may not be discovered by the user immediately after being powered on. There are two ways to prevent the APP from actively discovering the device.

1, if the module does not carry Bluetooth, you can reset the module's network configuration to AP pairing mode, and you need to actively identify the device configured as EZ network (Smartconfig mode) mode;

2, control the module's EN pin through the MCU, controlling whether the module is enabled.