Cancel

Why does the module's network status change to low power mode?

Last Updated on：2023-11-16 07:57:56

The module enters low power mode because the working mode is configured as "Timeout Network Configuration" or "Misoperation Prevention Network Configuration" when MCU replies to product information. If the device is not configured within 3 minutes in timeout network configuration, it will enter a low power state. If the device has not been networked before (removed by APP or new device), it will enter a low power state if it hasn't been configured within 3 minutes in a misoperation prevention network configuration. After entering the low power mode, sending a reset command will put the module in the Smartconfig mode or AP network configuration mode.