Register

Log In

Register

Log In

Cancel

What are the data refresh rules on the energy monitoring page?

Last Updated on：2023-11-22 03:43:48

When you enter the page of Energy Monitoring, the system will query the current real-time energy parameters of the device and refresh them; if you stay on page, the system will refresh the data every 5 seconds.

If you do not stay on the page, the device will report the data according to the actual situation. In order to avoid circuit interference or frequent reporting due to small-scale fluctuations in the power consumption of the electrical equipment itself, the current voltage threshold is set.

Judgment basis for device reporting	Mechanism
Detection period	Uniform: Long interval: 30s. Short interval: 5s. If no change is found during the interval, the interval will change into a long one. If it changes, the interval will change into a short one.
Change rate threshold	Voltage change: 2%, or power change: 20% by default. Current change: Ignored.
Low-power processing mechanism	When the real-time power is less than 20w and the absolute value of the power change exceeds 3w, the data is reported.

Related Topics

What is the rule for Faults Analytic on the Data page?

How long can the energy monitoring data be stored?

Click for services and help

Help Center

Consult

(001)844-672-5646

Submit Question