Cancel

What is the problem with the switch and the automatic switch of the socket?

Last Updated on：2023-01-30 09:53:29

There are two main reasons for the automatic switch problem:

One is that the button ripple is too large or the touch button sensitivity is too high to trigger falsely. This situation may happen automatically.
The second is that the module VCC is powered off and restarted.

Solution:

You can first determine the cause of the problem according to the phenomenon. Then implement corresponding measures for testing and verification.

If it is a key ripple, you can add 104 capacitors to the key port;
If it is a touch switch or socket, you can add RC to the touch terminal to reduce the touch sensitivity;
If the module VCC is powered off and restarted, you can add Large output capacitor, increase the power supply IC over current point;